PROLiNK MASTER II Series User Manual

13
 LCD Change
When LCD is in “Rack Display”, if you touch “LCD Change” icon, it will pop-up “Tower Display” window.
When LCD is in “Tower Display”, if you touch “LCD Change”, it will pop-up “Rack Display” window.
Touch ”Yes” icon to change LCD Display.
Touch “No” icon to cancel this operation and back to CONTROL screen.
Touch “HOME” to return to main screen.
Tower Display Rack Display
 Exit Parallel
If the UPS is set as parallel mode, you can touch this icon to stop parallel mode.
Touch “Yes” to stop parallel mode and enter into standby mode.
Touch “No” to cancel this operation and back to CONTROL screen.
If the UPS is operated in single mode, even you touch this icon, it will pop-up “This mode can’t be
setup” window.
Touch “HOME” to return to main screen.
Exit Parallel This mode can’t be setup

PROLiNK MASTER II Series Specifications

General

Brand	PROLiNK
Model	MASTER II Series
Category	UPS
Language	English