PROLiNK MASTER II Series - Page 28

26
VOLTAGE CALIBRATE Page2
 BATT VOL: Battery voltage calibration. Click value columns and it will pop up . Then, each click is 0.1%
no matter it’s pressing up or down key . Press “up” key to increase 0.1% and press “down” key to
decrease 0.1%. Press “OK” key to confirm the modification.
VOLTAGE CALIBRATE Page3
 Line VOL: Line voltage calibration. Click value columns and it will pop up . Then, each click is 0.1% no
matter it’s pressing up or down key . Press “up” key to increase 0.1% and press “down” key to decrease
0.1%. Press “OK” key to confirm the modification.
VOLTAGE CALIBRATE Page4
 Output VOL: Output voltage calibration. Click value columns and it will pop up . Then, each click is
0.1% no matter it’s pressing up or down key . Press “up” key to increase 0.1% and press “down” key to