PROLiNK MASTER II Series - Page 29

27
decrease 0.1%. Press “OK” key to confirm the modification.
VOLTAGE CALIBRATE Page5
 Inverter VOL: Inverter voltage calibration. Click value columns and it will pop up . Then, each click is
0.1% no matter it’s pressing up or down key . Press “up” key to increase 0.1% and press “down” key to
decrease 0.1%. Press “OK” key to confirm the modification.
VOLTAGE CALIBRATE Page6
 Bypass VOL: Bypass voltage calibration. Click value columns and it will pop up . Then, each click is
0.1% no matter it’s pressing up or down key . Press “up” key to increase 0.1% and press “down” key to
decrease 0.1%. Press “OK” key to confirm the modification.
CURRENT CALIBRATE
Current Calibrate Page