PROLiNK MASTER II Series - Page 31

29
INITIAL CALI Page
 CALIBRATE: After clicking “CALI”, it will pop up a message board as shown in above screen. Touch
“YES” to restore default calibration value. Touch “No” to cancel this operation. Touch “ ” to return
to INITIAL menu page.
INITIAL  EEPROM Page
 EEPROM: After clicking “EEMPROM”, it will pop up a message board as shown in above screen. Touch
“YES” to clear all setting value in EEPROM. Touch “No” to cancel this operation. Touch “ ” to return
to INITIAL menu page.
+
INITIAL  TOUCH CALI Page
 TOUCH CALI: After pressing the confirmation window, it will pop up as shown in above screen. Touch
screen to recalibrate. Then, the blue screen appears and please click on the place of the cross with your
mouse.