PROLiNK Professional II+ Series - 1-6. Standards; INSTALLATION AND OPERATION; 2-1. Unpacking and Inspection

3
1-6. Standards
2. INSTALLATION AND OPERATION
2-1. Unpacking and Inspection
Open the package and check the contents of the package. The shipping package contains:
a. One UPS Unit
b. One user manual
c. One CD of monitoring software
d. One RS-232 cable (option)
e. One USB cable
f. One battery cable (option)
Note:
Before installation, please check the unit. Make sure that none of the parts inside the package are
damaged during transportation. Do not turn on the unit and notify the seller and dealer immediately if
there is any damage or deficiency in some parts. Please keep the original package in a safe place for
future use.
*Security
IEC/EN 62040-1
*EMI
Conducted Emission.................................................:IEC/EN 62040-2
Category C3
Radiated Emission.........................................................:IEC/EN 62040-2
Category C3
*EMS
ESD............................................................................:IEC/EN 61000-4-2
Level 4
RS................................................................................:IEC/EN 61000-4-3
Level 3
EFT...............................................................................:IEC/EN 61000-4-4
Level 4
SURGE......................................................................:IEC/EN 61000-4-5
Level 4
CS................................................................................:IEC/EN 61000-4-6
Level 3
Power-frequency Magnetic field..............:IEC/EN 61000-4-8
Level 4
Low Frequency Signals...............................:IEC/EN 61000-2-2
Warning:
This is a product for commercial and industrial applications within the constraints of a
second installation environment or additional measures may be required to prevent interference