EN ENGLISH
CONTENTS
Machine identication data .......................... 73
2.1. Specications and composition ............ 74
2.2. Machine equipment .............................. 75
2.3. Mechanical protective devices .............75
2.4. Electric safety devices .......................... 75
2.5. Aerial noise ...........................................75
2.6. Vibrations .............................................75
3.1. Dimensions and weights ......................75
The operations marked with this symbol
are to be undertaken exclusively by an
installation technician
The operations marked with this symbol are
to be undertaken by the user.
IT ITALIANO 12-31
FR FRANCAIS 33-51
DE DEUTSCH 52-71
ES ESPAÑOL 92-111
PT PORTUGUêS 112-131
SCHEMI ELETTRICI
SCHEMAS ELECTRIQUES
SCHALTPLANE
ESQUEMAS ELECTRICOS
ESQUEMAS ELÉTRICOS
SCHEMI IDRAULICI
SCHÉMAS HYDRAULIQUES
HYDRAULIKPLÄNE
ESQUEMAS HIDRÁULICOS
ESQUEMAS HIDRÁULICOS
4.1. Precautionary measures ......................76
5.1. Packaging .............................................76
5.2. Inspection on receipt ............................ 76
6.1.Connections to be made by the user ..... 77
6.1.1. Water and gas supply ........................77
6.1.2. Electric supply ................................... 77
6.2. Preliminary operations .......................... 78
6.3. Installation and rst-time start-up ......... 78
7.1. Controls ................................................78
7.2. Control instruments .............................. 79
7.3. Starting up ............................................79
80
8.1. Preparing coffee ...................................80
8.2. Preparing cappuccino ...........................80
8.3. . Warming a beverage ..........................81
8.3.1. For PU - ME - PLUS models ............. 81
8.3.2. For PLUS + TS models ...... .............. 81
8.4. Preparing tea, camomile, etc.................81
81
9.1. User programming ................................ 81
9.1.1. For ME-COMPACT-CLUB models ....81
9.1.2. For PLUS - PLUS+TS models ........... 82
9.2.Technical programming ......................... 84
9.2.1. For ME-COMPACT-CLUB models ....84
9.2.1.1. Selection of the water level probe
sensitivity mode ........................................... 84
9.2.1.2. Selection of ll-up time-out ............. 84
9.2.1.3. Activation / deactivation of the
dose programming function ......................... 85
9.2.1.4. Alarm signalling .............................. 85
9.2.1.5. Absence of pulses of volumetric
counter .......................................................85
9.2.2. For PLUS - PLUS + TS models ......... 86
9.2.2.1. PLUS Model maintenance warning
system, consumption resetting .................... 88
9.2.2.2. Setting litres to zero, lter
replacement .................................. .............. 88
9.2.2.3. Boiler temperature probe short
circuit / overheating (PLUS Mod.) ..............88
9.2.2.4. Disconnected / interrupted boiler
probe temperature (PLUS Mod.) ................. 88
89
10.1. Daily ...................................................89
10.2. Weekly ................................................89
10.3. Regular-interval maintenance
and repairs ..................................................90
10.3.1. Renewal of water n the boiler
mod.CLUB PU - ME ........................ 90
10.3.2. Renewing the water in the boiler
mod.ME ......................................................90
10.3.3. Regeneration ................................... 90
91
91
To Next Page
Loading...
