To Next PageTo Next Page
Need help?Do you have a question about the Promac COMPACT PU and is the answer not in the manual?
Details the necessary connections for water, gas, and electricity supply by the user.
Covers essential steps before and during the initial machine startup.
Provides step-by-step instructions for safely starting the machine.
Detailed guide on how to prepare coffee, including grinding and dispensing.
Instructions for preparing cappuccino, focusing on milk frothing.
Describes how to adjust water level probe sensitivity for optimal performance.
Explains how to set the maximum time for boiler filling operations.
Instructions to enable or disable the automatic coffee dose programming feature.
Details how the machine signals alarms like low water or probe issues.
Covers settings for pre-infusion and adjusting water probe sensitivity.
Options to configure fill-up time-outs and water filter usage tracking.
Explains how to reset the maintenance warning for the PLUS model.
Addresses alerts for boiler temperature probe short circuits or disconnections.
Step-by-step guide for daily cleaning of the machine's exterior and components.
Provides solutions for common problems like machine not starting or slow dispensing.
General| Number of Groups | 1 |
|---|---|
| Boiler Material | Copper |
| Hot Water Outlets | 1 |
| Steam Wands | 1 |
| Material | Stainless Steel |
| Pump Pressure | 15 bar |
| Type | Espresso Machine |
| Voltage | 230 V |
| Capacity | 5 liters |
