The parameters for automatic switching ON will be
shown on the display:
Auto ON / OFF
ON : - - . - -
Press E once again and the display will indicate the
parameters for automatic shutdown programming:
Auto ON / OFF
OFF : - - . - -
To either increase or decrease the numbers that
make up the time setting, act on keys A and B (g.
7). To conrm, press on key E.
Leaving unvaried the numbers indicating the time,
the automatic ON/OFF function is not set, therefore
the machine switches on and off manually using the
general switch.
Pressing E once again sets the day and the weekly
shutdown (it is possible to set one only day of shu-
tdown).
The display indicates
Closed On
- - - - - - -
Press A and B (g. 7) to run along the days of the
week. Press E to conrm. If the setting remains
unchanged, day of
shutdown is not programmed.
Consumption, litres, maintenance readings : fol-
lowing the time-setting menu, press E for meter
reading, press C to enter the submenu.
Display indicates
Litres
0 00/00/00
The litres of water used till that moment and the day
of the last updating relative to lter maintenance will
be displayed.
Press E to continue to next display :
Display indicates
Service
0 00/00/00
The number of cycles carried out till that moment
and the date relative to last supplied-coffee signal
maintenance will be displayed.
Press E to continue to next display:
Display indicates
Coffees total
00
The total number of coffees supplied till that moment
is displayed, a double supply of coffee counts as a
single supply.
Press E to continue to next display :
Display indicates
Epresso Gr.1
00
The number of espresso coffees supplied from the
rst unit till that moment is displayed.
Press E repeatedly to display the totals of each type
of coffee per unit (espresso, coffee, 2 espressos, 2
coffees, continuous).
The next step is reading of the quantity of tea supplied
by each pushbutton panel (1 g, 2 g, 3 g).
Press E again to quit the programming menu.
83
To Next Page
Loading...
