ActivPanel User Guide 37
Active Area options enable you to determine the size of the area where the pen is functional on
the pen display. When you make a selection, the red indicator updates to illustrate your choice.
•
Force Proportions adjusts the size of the tablet’s active area to maintain correct vertical and
horizontal proportions between the pen display and the entire desktop or newly mapped-to
display. Depending on your settings, some portions of the tablet active area may no longer be
usable when this option is selected.
•
When deselected, the correct scale or proportions are not maintained – for example, sketching a
circle on the pen display may create an ellipse on a mapped-to display screen.
•
Use Inset Area limits the tablet’s active area to a sizing of 6 x 8 inches. If Force Proportions is
also selected, this sizing may be less. When deselected, as much as possible of the entire tablet
active area will be used for tablet-to-display mapping.
Important:
If you are using application specific settings with Display Toggle, make sure each customized application
in the Application list (including All Other) has a pen button that is assigned to Display Toggle.
Customizing
Display Toggle is available only on multiple monitor systems. The feature allows you to use your pen on
the interactive pen display to navigate the screen cursor to any display on your system. After setting a pen
side switch to the Display Toggle function, you can then press that button to toggle the screen cursor
between the pen display and your other displays. For example, your product can be used as a pen display
where the screen cursor is positioned at the pen tip location, or toggled for use as a standard ActivPanel
tablet where the screen cursor can be moved across the entire desktop or additional displays.
When you open the ActivPanel Tablet control panel and the pen display is the selected tablet, the
Display Toggle tab will be available if the system has two or more displays. The Display Toggle tab
enables you to define how the mapping will be applied to each toggled display.
When Pen Display to Other
Displays is selected and you press
the pen button, the screen cursor is
toggled from your pen display to
another active pen display or
monitor.
If additional displays are attached
to the system, the screen cursor will
toggle to each display in turn until it
returns to the pen display from
where the initial toggle began.
When Pen Display to Desktop is selected and you press a pen button that has been assigned the
Display Toggle function, the Screen Cursor will toggle from your pen display to the entire system
desktop. Pressing the button a second time returns the screen cursor to the pen display.
To Next Page
Loading...
