ProMinent S2Ba User Manual

Part No. 987282 ProMinent Dosiertechnik GmbH · 69123 Heidelberg · Germany BA SI 018 10/03 GB
ProMinent
®
Please completely read through these operating instructions first! · Do not discard!
The warranty shall be invalidated by damage caused by operating errors!
Two sets of operating instructions are necessary to ensure the ProMinent
®
Sigma/ 2 S2Ba or S2Ca metering pumps
are operated safely and reliably for their intended purpose:
This product specific Sigma/ 2 operating instructions manual and the ”General operating instructions
ProMinent
®
motor-driven metering pumps and hydraulic accessories” are only valid if read together!
Operating Instructions
ProMinent
®
Sigma/ 2
S2Ba (Basic Type)
S2Ca (Control Type)
S
T
A
R
T
S
T
O
P
S2Ba S2Ca
Please enter the identity code of the device here.
S2Ba
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
S2Ca
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

ProMinent S2Ba Specifications

General

Protection class	IP 65
Diaphragm Material	PTFE
Stroke length	Adjustable
Power supply	230 V, 50/60 Hz
Max Pressure	20 bar
Materials	PVDF, EPDM, Stainless Steel

Summary

Control elements and key functions

Control elements: overview

Provides an overview of the pump's physical control components and their layout.

Key functions

Explains the operation and purpose of the pump's control keys.

Identcode ordering system

S2Ba Identcode ordering system

Specifies how to order the ProMinent S2Ba pump model using its identcode.

S2Ca Identcode ordering system

Specifies how to order the ProMinent S2Ca pump model using its identcode.

1 Notes on safety of ProMinent® metering pumps

1.1 Summary of additional safety instructions for the EX version of the pump (in accordance with ATEX)

Safety guidelines specific to EX-version pumps and ATEX compliance.

1.2 General notes

General safety instructions and warnings for operating the pumps.

1.3 Notes on installation, start-up and operation

Safety considerations for installing, starting up, and operating the pumps.

2 Product description S2Ba/S2Ca

2.1 Identification of pump type

How to identify the specific pump model using its identity code and serial number.

2.2 Design/Functional description

Detailed explanation of the pump's design and how its components function.

3 Technical data

3.1 Technical data Sigma/ 2

Comprehensive technical specifications for the Sigma/2 series pumps.

3.1.1 Capacity data

Details on pump capacity, flow rates, and pressure ratings.

4 Start-up/Maintenance

4.1 Start-up

Instructions and precautions for starting up the metering pump.

4.2 Maintenance

Guidelines and procedures for routine maintenance of the pump.

5 Features of the S2Ca metering pumps

5.1 Function description, motors

Details on the motor's function, including overload protection.

5.2 Function description, controller

Explains the controller functions and operating modes.

6 Control elements

Indicators

Explains the indicators on the LCD display and their meanings.

7 Settings

Basic information for setting up the S2Ca

General information and steps for configuring the S2Ca pump settings.

7.1 Check adjustable values

How to check the current settings of adjustable values on the S2Ca.

7.4 Settings for operating mode (SET menu)

7.4.1 Settings for "manual" operating mode

Settings specific to the manual operation mode.

7.4.2 Settings for “analogue” operating mode (ANALG menu)

Settings for the analogue control mode.

7.5 Settings for programmable functions (SET menu)

7.5.1 Settings for “calibration” function (CALIB menu)

Procedure for calibrating the pump's stroke length and output.

8 Operating

8.1 Manual operation

Step-by-step guide for manual operation of the pump.

9 Troubleshooting

10 Decommissioning and disposal

11 Spare parts and accessories