28
2. Protocol
Nine options are available for this setup:
Disable: if protocol is “Disable”, WAN will be closed; hence, the information of WAN IP and WAN
Netmask will not be effective.
EoA
EoA + NAT
IPoA
IPoA + NAT
PPPoA
PPPoA + NAT
PPPoE
PPPoE + NAT
DHCP Mode
Choose whether DHCP mode should be “Disable”, “Server” or “Relay”.
This section is only available when the protocol is “PPPoA”, “PPPoA + NAT”, “PPPoE”, or “PPPoE + NAT”.
PPP Protocol