61
Click on the number of each entry and the configuration page will be shown as below.
IPSec configuration parameters:
1. Mode: to disable or enable the selected IPSEC policy.
2. Name: IPSEC policy name.
3. WAN: to select a WAN port to apply this policy.
4. Perfect Forward Secrecy:
Perfect forward secrecy is the property that ensures a session key derived from a set of long-term public
and private keys will not be compromised if one of the private keys is compromised in the future.
Choose either “Disable” or “Enable” this property.
5. Local Subnet
6. Local Netmask
7. Remote Public IP
8. Remote Local LAN Subnet
9. Remote Local LAN Netmask
10. Pre-shared Key
To Next Page
Loading...
Need help?
General
