EasyManuals Logo

Proscend 6200 SERIES User Manual

Proscend 6200 SERIES
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
94
commonly installed technical variety of DSL. DSL
service is delivered simultaneously with regular
telephone on the same telephone line.
This is
possible because DSL uses a higher frequency.
EoA Ethernet-over-ATM EoA protocol is commonly used to carry data between
local area networks that use the Ethernet protocol and
wide-area networks that use the ATM protocol. Many
telecommunications industry networks use the ATM
protocol. ISPs that provide DSL services often use
the EoA protocol for data transfer with their customers'
DSL modems.
IGMP Internet Group
Management Protocol
IGMP is a communications protocol used to manage
the membership of Internet Protocol multicast groups.
IGMP is used by IP hosts and adjacent multicast
routers to establish multicast group memberships.
IPoA Dynamic IP over ATM IPoA interfaces carries IP packets over AAL5. AAL5
provides the IP hosts on the same network with the
data link layer for communications.
In addition, to
allow these hosts to communicate on the same ATM
networks, IP packets must be tuned somewhat. AS
the bearer network of IP services, ATM provides high
speed point-to-point connections which considerably
improve the bandwidth performance of IP network.
On the other hand, ATM provides excellent network
performance and perfect QoS.
MSCV Manufacture's Concurrent
Software Version
MCSV is the original factory version and remains even
after upgrading the router in the field. This is for
internal identification purposes.
NAT Network Address
Translation
NAT is the process of modifying network address
information in datagram (IP) packet headers while in
transit across a traffic routing device for the purpose of
remapping one IP address space into another.
PCR Peak Cell Rate PCR in kbps: The maximum rate at which you expect to
transmit data, voice and video. Consider PCR and
MBS as a means of reducing latency, not increasing
bandwidth.
Port-Based VLAN Known as Static VLAN Static VLAN assignments are created by assigning
ports to a VLAN. As a device enters the network, the
device automatically assumes the VLAN of the port. If

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Proscend 6200 SERIES and is the answer not in the manual?

Proscend 6200 SERIES Specifications

General IconGeneral
BrandProscend
Model6200 SERIES
CategoryNetwork Router
LanguageEnglish

Related product manuals