5
Caution when Transporting
As specialised refrigeration equipment, avoid all violent
impacts and shakes during transportation and always
keep in an upright position. Never place side down. The
maximum gradient/tilt is 15 degrees during
movement. (Diagram 1)
During transportation of the machine (without packaging)
a soft suspending strap should be used.
If fitted with wheels, the machine can be moved on firm
and flat ground, but remember to loosen the brake on the
equipment during transportation. The front wheels of
t h e m a c h i n e a r e the versatile ones and the rear
wheels are fixed. (Diagram 2)
During installation of the machine it is advised to first
move the machine close to the planned working position.
When installation is complete push the machine backward
until it is in the correct position and if fitted with wheels,
step on the brake pedal on the front of the machine.
The machines final internal location should be on a firm,
dry structural surface and not near a heat source and
completely protected, water and direct sunlight. (Diagram
3)
To Next Page
Loading...