16
I. The refrigeration system is not working
1. This may be caused when the machine has been running without a break for a
prolonged period of time and / or the ventilation is blocked or inadequate.
2. The automatic refrigeration system of the machine may have switched to protective
mode indicating that the limits of the machine have been reached.
Solution: The machine must be allowed to cool down until the temperature is within the
operating range. If there is a problem with the fan or the compressor please contact a
ProServe engineer on: 01395 239500.
Maintenance & Service
It is highly recommended the machine is serviced every 6 months or sooner if the machine is
in constant use. This is to ensure the performance of the machine is kept at the optimum
and to ensure the warranty remains valid.
If the machine is not serviced at these regular intervals, faults through lack of maintenance
will occur and these will not be covered under warranty.
Please ensure all servicing is only undertaken by a ProServe/authorised engineer using
genuine parts where required.
Spare Parts
The machine is initially supplied with some free consumable parts. It is still suggested that
you purchase further consumable parts according to your working requirements.
Please Note: All Gaskets and O-rings to be replaced generally every three months.
Please Note: When ordering parts you will need to confirm the model and serial
number of the machine.
To Next Page
Loading...