Manual & Installer Guide 16
Review your program.
Press SAVE to keep your program.
Press EDIT to make further
changes.
NEXT
When you are finished editing the
time periods press
Edit My Schedule
(Continued)
Adjust Mode, Start Time, Stop Time, and Heat and Cool Setpoints to desired
settings. The Time Period May also be Enabled or Disabled. Un-check the
enabled box for Time Periods you don’t want to use. Press DONE when
finished.
Save
Edit
Mode
Done
Enable/Disable
Time Period
Heat and Cool Setpoints
MODE
Press
or the MODE Icon
On the Home Screen to select to
Run or Stop Schedule
Unoccupied Settings
Mode
(Auto)
Heat Setpoint
(55˚)
Cool Setpoint
(85˚)
Choose your Mode and Heat and Cool setpoints for the Unoccupied period.
Start Time
Stop Time
Allow Setpoint Changes
(No)
Main Menu Buttons – Schedule
To Next Page
Loading...
Need help?
General
