63 Manual & Installer Guide
The installer or service
technician can use this
feature to test the
functions without any
time delays from
the thermostat.
Test Outputs
With a 1st stage cooling call, Y1 and G are active
Wired Sensor Use
(remote)
The wired sensor may be used as follows:
The integral humidity sensor may be calibrated -20% to +20% RH
Calibrate Sensors
(0˚)
The thermostat and wired sensor may be calibrated -7 to +7 degrees F.
Installation Settings
(Continued)
• Use as outdoor sensor
• Use as remote sensor
• Use as supply sensor
• Use as return sensor
• Thermostat
• Wired Sensor
• Humidity
Main Menu Buttons – Settings
(PSP4273CT only)
To Next Page
Loading...
Need help?
General
