Manual & Installer Guide 42
Main Menu Buttons – Settings
Import and export files to and from the thermostat. See
the TouchScreen Desktop App instructions for further
details.
Thermostat Name
Settings
Available Modes
(all)
Choose the desired modes the thermostat will use: Heat, Cool, Heat & Cool,
or Auto (All). For example, if you only have a heater, choose Heat, and only
Heat & Off modes will be available. This will simplify the operation for the user.
Use keypad to name
your thermostat. The
name is displayed on
the Home Screen.
Thermostat heating and
cooling options are found
in this menu
Name appears here
General Setup
Units
(F)
Fahrenheit (F)
Celsius (C)
SD Card
Import Settings from SD Card
Export Settings to SD Card
Upload files from the To uchscreen Desktop App
or another thermostat.
Export files from one thermostat and import them into others.
(Up to 14 characters)
*NOTE: A 2GB SD card is
recommended. To import and
export files, the SD card must
contain the same version of the
firmware as the thermostat.
TouchScreen Assistant will keep
the firmware current.
To Next Page
Loading...
Need help?
General
