35 Manual & Installer Guide
Auto Screenlock
Setpoint Limits
Security settings may be
set to limit or prevent changes
to your thermostat.
Security
Limits how high or low heating and cooling may be adjusted.
Lock After...
Auto Screenlock - OFF
Use keypad to enter and confirm passcode.
Set Passcode
(code not set )
(1 m)
Auto Screenlock - ON
NOTE:
Code must be set
before Auto Screenlock
can be turned on.
Press UNLOCK then enter passcode to access thermostat settings.
Set the time the screen will automatically lock after the last button press.
When the thermostat
is locked, the bottom
bar of the display will
show:
Allow fan/mode changes - NO
Allow setpoint changes - NO
Allow override - NO
Choose to allow mode changes when Auto Screenlock is on.
Choose to allow setpoint changes when Auto Screenlock is on.
Choose to allow use of the Override button when Auto Screenlock is on.
Maximum Override Time
Select the maximum amount of Override time that will appear as options after
pressing the Override button from the home screen when running a schedule.
Select times from 30 minutes to 4 hours in 30 minute increments.
Main Menu Buttons – Security
To Next Page
Loading...
Need help?
General
