P2_GEPARD_installer manual_ work basis_EN_02 - 03/10 - protherm
- 24 -
INSTALATION
Code Description Manufacturing
setting
Minimum
value
Maximum
value
96 Reset adjustable parameters to the factory settings 0 0 1
Re-check and restart10.3
After installing equipment, equipment check.•
Start the installation to check that the settings are correct •
and make sure equipment is working safely.
Informations for user11
On completion of installation the installer must:
user to explain how the equipment functions and safety -
devices, and if necessary running equipment and bring the
user to answer questions;
user-submitted all necessary documentation; -
complete documents, where necessary; -
alert the user of the measures necessary to prevent damage -
to the system, equipment and buildings;
user recalled that each year the device service. -
To Next Page
Loading...
