INSSTCP0408
3. Operation
First Start-up
At the first start-up, the thermostat is initially in the Man (man-
ual) and Floor modes. The temperature is displayed in degrees
Celsius and the standard factory set point adjustment is 21°C.
The hour displays --:-- and must be adjusted before switching
to the Auto or Pre Prog mode. The maximum floor temperature
is limited to 28°C.
Ambient and Floor Temperature
The figures displayed below the word “AMBIENT” indicate the
ambient temperature, ±1 degree. The figures displayed below
the word “FLOOR” indicate the floor temperature, ±1 degree.
Both temperatures can be displayed in degrees Celsius or Fahr-
enheit (see “Display in degrees Celsius/Fahrenheit”).
Red Indicator
(EGFPD Te st)
To Next Page
Loading...
