INS8800 Rev. D 1
Protimeter MMS2 Instruction Manual
1. Introduction
The Protimeter Moisture Measurement System2 (Protimeter MMS2) is a
powerful and versatile instrument for measuring and diagnosing dampness in
buildings and building materials. This product enables building surveyors and
other practitioners to measure moisture levels of building elements such as
walls, floors and building environments simply by switching between the five
different modes of operation. In this way, a detailed understanding of the
moisture condition of the property can be obtained.
2. Safety Considerations
• Caution note for the WME pins - The Pin Moisture measurement pins are
extremely sharp and the instrument should be handled with due care. The
pins should be covered with the cap provided with the unit when the
function is not in use.
• IR temperature measurement - Please note that the readings are indicative
readings outside the measurement range of the IR temperature mode and
the accuracy of the measurement is not guaranteed outside the range.
• Calibration of unit - The accuracy specifications of the product are valid
for one year after the date of calibration, and the product requires
recalibration after this period.
Laser pointers are effective tools when used properly, but the following
considerations must be observed when using laser pointers:
• Never look directly into the laser beam.
• Never point a laser beam at a person.
• Do not aim the laser beam at reflective surfaces.
• Never view a laser beam using an optical instrument, such as binoculars
or a microscope.
2. Safety Considerations (cont.)
To Next Page
Loading...
Need help?
General
