By Time Search:
Step1: Enter into SearchTime search. Refer to Fig 8-4:
Fig 8-4 Time Search Interface
Step2: The highlight date in the area② indicates recorded data. Select the date in the area ② and record
channels in area③.
Step3: Click “Search” button. The record data will be displayed in the data information list box.
Step 4: Set the Start time and display mode in the area① as required.
Step 5: Click “play” button to playback.
Step 6: Click the relevant buttons in the interface for operation, like FF, pause, change channel mode,
research, etc. Please refer to Fig 8-5:
Fig 8-5 Time Search Playback
To Next Page
