Prowinch PWA - Electrical Connections

Version 1.0 Version 1.0
Installation
20
20
3.2. Electrical Connections
Fuses and other current overload devices must be in place to protect power
supply.
Do not use power supply cables with solid conductors.
An improper or insucient ground connection creates an electrical shock hazard
when touching any part of hoist or trolley
Operator and/or owner must provide main power supply hardware (cable, conductor bar, fuses, disconnect switch, etc.)
DANGER
LOCKOUT/TAGOUT
POWER BEFORE SERVICING,
REPAIRING, CLEANING
OR RETOOLING EQUIPMENT
PWDA001-V1.0
®
DANGER
MAINTENANCE AND REPAIR
TO BE PERFORMED BY
AUTHORIZED
PERSONNEL ONLY
PWDA002-V1.0
®
WARNING
READ AND UNDERSTAND
OPERATOR’S MANUAL AND
ALL OTHER SAFETY
INSTRUCTIONS BEFORE USING
THIS EQUIPMENT.
THIS EQUIPMENT MUST BE
OPERATED BY TRAINED
AND EXPERIENCED
PERSONNEL ONLY.
PWWA002-V1.0
Hazardous Voltage
Inside.
Disconnect power
before opening.
PWDA005-V1.0
DANGER