Version 1.0
31
Inspection & Maintenance
31
1. OPERATION
1.1. Periodic Inspection
After checking all the requirements necessary to run this unit (hertz, amps, volts)
printed in the side label of this unit, you may start using it. In case that you need
an extension cord please follow the directions in reference to the thickness and
length of the cable.
The electrical installation should meet the requirements for the peak
consumption.
Note: Check the breaker threshold.
It is sole responsibility of the user to periodically check the wire rope, anchoring or
any other part that may be damaged or worn out.
Instpection:
1. Periodically check the status of the wire rope.
2. Check and tighten the bolts and nuts.
3. Periodically check the correct functioning of the emergency stop.
To Next Page
Loading...
