Prowinch PWA - Recommended Operation for Maintenance

Version 1.0 Version 1.0
Inspection & Maintenance
34
34
1.2 Recommended Operation
Before each use, inspect the general condition of the hoist. Check for loose screws,
misalignment or binding of moving parts, cracked or broken parts, damaged
electrical wiring, and any other condition that may aect its safe operation. If
abnormal noise or vibration occurs, have the problem corrected before Further
use. Do not use damaged equipment.
1. Wipe the Hoist down with a lint free cloth.
2. Check the cable for tears, excessive wearing, damage or frays. If you nd any, do not use the Hoist until
the cable is replaced by a qualied technician. Only use genuine replacement cable (Cable (#56)). Do not
substitute rope or any other type of cable.
3. Periodically lubricate the cable with a light oil.