Risk of damage to the system if faults are remedied incorrectly.
Make sure that faults are only ever remedied by specialist personnel.
There are two categories of system faults:
• Faults that are detected by the controller and trigger a fault message
• Faults that are not detected by the controller and do not trigger a fault message.
13.1 Faults with fault message
In the event of faults with fault messages, the fault symbol will start flashing in the bottom
part of the display. An acoustic warning signal will also be sounded if the "Acoustic warning
signal" function is active.
To switch off the acoustic warning signal, press the operating button.
The acoustic warning signal will fall silent.
Displaying fault messages
To display the fault message, go to the "Info" menu.
Use the operating buttons and to navigate until the fault message is displayed.
To Next Page
Loading...