1 Safety
This chapter contains information on:
• the proper use of the controller and
• the safe use of the controller.
Read this chapter through carefully before you install, connect or operate the controller.
1.1 Proper use
The controller is used for monitoring and controlling a solar thermal system.
Appropriate use of the controller includes the following requirements:
• Use the controller exclusively in dry rooms in residential, commercial and/or industrial
environments.
• Use only sensor connection boxes supplied by the manufacturer.
• Use the RS485 interface (ProBus and ProBusX) only for networking further
devices from the manufacturer Prozeda.
The definition of proper use also encompasses observing and complying with all of the
information contained in this manual - in particular compliance with all safety information
and instructions.
Any other use, or any use exceeding the specifications, will be deemed to be improper use
and may lead to personal injury or damage to property and shall render the warranty void.
Use of the controller in the following situations in particular is considered to be improper
use:
• If you modify the controller independently and without prior authorisation
• If you operate the controller in a humid or wet environment
The manufacturer shall not be liable for damages arising from inappropriate use.
1.2 Basic safety information
This section contains basic safety information relating to working with the controller. You
will find additional safety information relating to specific actions and workflows at the
beginning of the section concerned.
Preventing risks of explosion
• Never use the unit in areas where there is a risk of explosion.
To Next Page
Loading...