Changing values
To activate the displayed menu item, select .
The value flashes.
To increase the value, select .
To reduce the value, select .
To cancel the entry, select .
The value stops flashing. The value that is currently set will be displayed.
To confirm the entry, select .
The value stops flashing. The OK symbol will be displayed.
To cancel the entry, select .
The value that is currently set will be displayed.
To re-confirm the entry, select .
The OK symbol will no longer be displayed. Your entry has been adopted.
If you press the or buttons once, the value will be increased or reduced in
steps. If you keep these buttons pressed, the value will be increased or reduc
a continuous basis.
6 Displaying and changing the values in the
menus
This chapter provides an overview of the menus and menu items.
6.1 Displaying values in the "Info" menu
The "Info" menu allows you to display measurement and output values. Values that are
marked by "×" in the "Reset" column can be reset.
Depending on which additional functions have been activated, not all values will
necessarily be displayed.
To Next Page
Loading...