© PSI (Photon Systems Instruments), spol. s r. o.
10
PAR-FluorPen FP 110/X
Measures in addition to standard fluorescence protocols also Photosynthetically Active Radiation (PAR) in the range from
400 to 700 nm. The “X“ version is mounted with custom-made leaf-clip.
Fig. 1a) PAR-FluorPen FP 110/S. b) PAR-FluorPen FP 110/D. c) FluorPen FP 110/P.
Monitoring Pen versions:
Monitoring Pen MP 100-E (Fig. 2a)
Durable, battery-powered fluorometer intended for autonomous use in field conditions. It features
a waterproof metal case, measuring probe, thread for tripod attachment, external pack with batteries and the FluorPen
1.1 software for data collection and processing.
Monitoring Pen MP 100-A (Fig. 2b)
Submersible, battery-powered fluorometer intended for underwater measuring of fluorescence parameters (also
autonomous). It features a waterproof case, measuring probe, and the FluorPen 1.1 software for data collection and
processing. External battery pack with batteries is sold separately. Generally, version A is intended for maximum water
depth up to 2 meters. The device is equipped with two buttons that allow direct control of the device (even under
water). Version B can be used in deeper water (maximum 10 m). There are no buttons on the device. This version is
intended for automatic measuring; the device control is enabled via commands preprogrammed in a PC (placed on
shore). The device is usually fixed in static position under water.
To Next Page
Loading...
