PSI FluorPen FP 110 - Firmware Update

© PSI (Photon Systems Instruments), spol. s r. o.
48
11. 4 FIR MWA RE U PDAT E
All data in the FluorPen memory are erased during the firmware update!
Before starting any firmware update, export all your data from the FluorPen memory into your
computer!
1. Starting Update
• Select: Setup > Update Firmware From File (Fig. 23).
Fig. 23 Update Firmware.
2. Warning
• Select: OK to start update (Fig. 24).
3. Selecting .bxn file
• Find: Binary file (with the extension .bxn) (Fig. 25).
• Select: Open.
Fig. 24 Warning.