Puma 20 - Decals and Instructions on the Wheelchair

To Next Page

To Previous Page

Seat adjustment factory settings

Sunrise Medical HCM will deliver a Puma wheelchair with default factory settings. These settings depend on the options ticked on

the order form. When a conﬁ guration is ordered that causes interference, Sunrise Medical HCM applies modiﬁ ed factory settings

and informs the customer of this via a note included in the wheelchair delivery. The seat tilt conﬁ guration tables also provide

detailed information about factory settings.

Moving parts

• A wheelchair has moving and rotating parts. Contact with moving parts may result in serious

physical injury or damage to the wheelchair. Contact with the moving parts of the wheelchair

should be avoided.

• Wheels (turning and castor)

• Electric tilt in space adjustment

• Electric high/low option

• Electric backrest adjustment

• Electric elavating legrests

Electromagnetic radiation

The standard version of your electric wheelchair has been tested on the applicable requirements

with respect to electromagnetic radiation (EMC requirements) In spite of these tests:

• it cannot be excluded that electromagnetic radiation may have an inﬂ uence on the wheelchair. For example:

• mobile telephony

• large-scale medical apparatus

• other sources of electromagnetic radiation

• it cannot be excluded that the wheelchair may interfere with electromagnetic ﬁ elds.

For example:

• shop doors

• burglar alarm systems in shops

• garage door openers

In the unlikely event that such problems do occur, we request that you notify your supplier immediately.

Decals and instructions on the wheelchair

• The signs, symbols and instructions afﬁ xed to the wheelchair comprise part of the safety facilities. They must never be covered

or removed. They must remain present and clearly legible throughout the entire lifespan of the wheelchair.

• Replace or repair all illegible or damaged signs, symbols and instructions immediately. Please contact your supplier for

assistance.

2.4 Used decals on the wheelchair

Check manual before using

Freewheel switch in ‘Drive’ mode

Freewheel switch in ‘Push’ mode.

Don’t put the freewheel switch in ‘Push’ mode on a slope

Battery charging connection

Attachment point of the tie-down system for transportation in a vehicle.

Puma 20/40/6010 | Safety