Puma 20 - Page 51

To Next Page

To Previous Page

Conversion set for converting RWD to FWD.

Tools required.

Step 2 Remove interface and seating.

Note! Lift the chair in case the wheel chair has an electrical lift.

Service instructions | 51

Puma 20/40/60

Service instructions | 51

Main Page

Table of Contents5
Introduction7
This Manual7
Identiﬁ Cation of the Product7
Symbols Used in this Manual8
Safety9
Maximum User Weight Reduction When Puma 20 Options Are Installed on a Puma 40/609
Personnel Qualiﬁ Cation9
Cautions and Warning Statements9
Used Decals on the Wheelchair10
Tools, Parts and Components12
Tools12
Tools Electronics12
Spare Parts13
Use of the Parts Lists13
Carrier and Seat Adjustments14
Battery Tray and Suspension and Chair Interface Puma14
Tilt and Lift Modules Puma14
Kerb Climber Puma14
Direct Access Puma14
Dahl Car Docking System Puma 40/60 FWD (Only I.C.w. Sedeo Pro+)16
Dahl Car Docking System Puma 40/60 RWD (Only I.C.w. Sedeo Pro+)17
Suspension Arm and Motors Puma 2018
Suspension Arm and Motors Puma20
Castor Forks and Wheels Puma 2020
Replacing the Drive Wheel, Indoor/Outdoor Puma20
Covers Puma 2023
Covers Puma 40/6024
Tilt Modules Puma 2025
Attendant Z-Steering (Only for Norwegian Market)29
Wiring and Modules Shark30
Wiring and Modules R-Net34
Wiring and Modules DX238
Suspension Arm and Motors Puma40
Castor Forks and Wheels Puma40
Covers Puma40
Replacing the Drive Wheel, Indoor/Outdoor Puma40
Wiring and Modules43
Service Instructions48
Maintenance Plan48
Assembly, Replacement and Adjustment Instructions49
Replacing Puma 20 Motors49
Converting Front Wheel Drive (FWD) to Rear Wheel Drive (RWD) and Vice Versa50
Mounting the Kerb Climber (RWD)59
Replacing the Carbon Brushes61
Replacing the Drive Wheel, Indoor/Outdoor Puma 2065
Replacing the Tube And/Or Tyre of a Drive Wheel, Indoor/Outdoor70
Replacing the Castor Wheel74
Replacing the Tyre And/Or Tube of the Castor Wheel76
Replacing the Castor Fork79
Mounting the Direct Access81
Mounting the Attendant Steering on Backrest Frame Sedeo Pro82
Mounting the Attendant Z-Steering Mechanisme Sedeo Pro+ (Only for Norwegian Market)83
Replacing the Batteries84
Replacing the Power Module88
Replacing the Mudguards90
Replacing the Coloured Covers (Not Valid for Puma 20)92
Replacing the Anti-Tip Wheels and Bracket94
Adjusting the Seating Height95
Adjusting the Centre Point of Gravity100
Adjusting the Mechanical Seat Tilt103
Adjusting the Electrical Seat Tilt104
Adjusting the Electrical Seat Tilt 0 - 45°, the Minimum Tilt Angle (0 - 9°)105
Adjusting the Electrical Seat Tilt 0 - 45°, the Maximum Tilt Angle (< 45°)107
Seat Tilt Conﬁ Guration Tables109
Guidelines to Solve Shimmy Problems117
Trouble Shooting118
Shark Faultﬁ Nding Table118
R-Net Faultﬁ Nding Table119
DX2 Faultﬁ Nding Table123
Faultﬁ Nding Table127
Technical Product Information130
CE Declaration and Standards130
Technical Information130
Electrical Diagrams133
Warranty143
Deﬁ Nitions of Terms143
Warranty Period Table143

Puma 20 - Page 51

Table of Contents