PURE EVOKE Flow - Listening to FM Radio; Selecting the FM Radio Audio Source; Tuning FM Stations with Seek and Manual

34
Listening to FM radio EVOKE Flow Owner’s Manual v1.0
EVOKE Flow is also a fully featured FM radio. This chapter explains how to operate EVOKE Flow in
the FM source, including seek and manual tuning and storing presets. You should extend the aerial for
optimum reception of FM broadcasts.
5.1 Selecting the ‘FM radio’ audio source
Select ‘FM radio’ source
1 Tap
until the Source screen is displayed.
2 Highlight and select ‘FM radio’ to enter the FM source.
5.2 Changing the station
Seek tuning (default)
1 Rotate the Select dial right or left to seek to the next or previous FM station that has a strong
signal.
2 RDS information, if available, will scroll down the screen after a few minutes.
3 Rotate the Select dial again to seek for a new frequency.
5.3 Using presets
To store an FM station as a preset
1 Tune to the frequency you want to store as a preset and tap O Presets.
2
Rotate the Select dial to highlight a preset number between 1 and 10.
3 Tap O Store to stor
e the preset to that position on the preset list.
Listening to FM radio
103.30
Searching...
OKPresets Options
XFM
OKPresets Options
XFM
5 Listening to FM radio