36
Listening to FM radio EVOKE Flow Owner’s Manual v1.0
6 Listening to an Auxiliary device
You can use EVOKE Flow to amplify the music stored on your iPod or portable music player. All you
need is a 3.5mm to 3.5mm auxiliary lead (not supplied) or an iPod docking cradle like the PURE i-10.
6.1 Connecting an iPod
®
or MP3 player
To connect an Auxiliary device
1 Connect one end of the auxiliary lead into the Headphone or Line out connector on your iPod
or portable music player.
2 Connect the other end into the ‘Aux In’ connector on the rear of EVOKE Flow.
6.2 Selecting the Auxiliary input source
To play an auxiliary device
1 Press
until the Source screen appears.
2 Highlight and select ‘Auxiliary input’ to enter Auxiliary source.
3 Press Play and adjust the volume on the iPod or MP3 player.
To Next Page
Loading...
