Need help?Do you have a question about the PUSR AC1000 and is the answer not in the manual?
General| Product Type | Wireless Access Controller |
|---|---|
| Category | Controller |
| Maximum Managed APs | 100 |
| Power Supply | External Power Adapter |
| Output Voltage | 12V DC |
| Certification | CE, FCC, RoHS |
| Frequency | 2.4GHz/5GHz |
| Management | Web, CLI |
| Input Voltage | 100-240V AC |
| Operating Temperature | 0°C to 40°C |
Instructions on how to connect and access the AC1000's web interface for initial setup.
Function for managing AP devices connected to the same LAN.
Settings for APs, including reboot, factory reset, and firmware upgrade.
Manage AP devices connected to the PUSR cloud, requiring SN and cloud password.
Import SN and cloud password to enable remote AP management via PUSR cloud.
Settings for APs managed via PUSR cloud, including reboot and reset.
Configure internet access settings, including mode selection, WAN, and IP mapping.
Set WAN port parameters like DHCP client, static IP, and PPPoE for internet access.
Steps for upgrading the device firmware via local file or online update.
To Next Page