PUSR AC1000 User Manual

AC1000 User Manual
pusr.com
1
- 15 -
3.3.3. AP settings
The settings for AP mainly include 7 actions: settings, restart, restore factory settings, upgrade, delete
(offline AP), flash LED, export SN and cloud password, as shown in the figure.
Figure 14. AP settings
The detailed information of actions is listed in the following table.
Table 4.
Items
Description
How to operate
Settings
Set the SSID and password of the WiFi.
Check the target device—>Enter SSID &
password→Confirm
Reboot
Reboot the AP device
Check the target device→ Confirm
Reset to factory
defaults
Reset the AP to factory defaults
Check the target device→ Confirm
Upgrade
Upgrade the firmware of AP
Check the target device→ select the
firmware→Confirm
Delete(Offline
AP)
Delete offline AP device
Check the target device→ Confirm
Changing LED
status
Change device LED light status
Check the target device→click “Switch”→
Confirm
3.3.4. AP information
On this page, users can view the detailed information of the AP device such as model, MAC, version, etc. You
can select the corresponding AP device by selecting the model and SN. The specific information is shown in the

PUSR AC1000 Specifications

General

Brand	PUSR
Model	AC1000
Category	Controller
Language	English