following figure.
Figure 15. AP detail
3.4. Internet accessing settings
There are 4 parts included in this function block: Mode Selecting, Network Port Settings, WAN Settings, IP
Mapping.
3.4.1. Mode selecting
There are 2 modes that can be selected: Router mode and AP mode.
Router mode: In this mode, the WAN port supports DHCP client, static IP, PPPoE. For LAN port, it support DHCP
service to assign IP addresses to terminal network devices.
AP mode: In this mode, WAN and LAN are bridged together, and DHCP service is turned off.
To Next Page
Loading...
Need help?
General