System Installation:
Before starting: To prevent short circuits, be sure to disconnect the battery terminal before starting.
Installation Guide
Caution:
1. Consult your vehicle dealership before making any modications to your car’s body (ex. Drilling holes)
2. Use included screws in installation. Improper operation may damage machine or cause accidents.
Do not install unit in any area where:
• It may obstruct the steering wheel and gearshift lever operations
• It may obstruct the operation of safety devices such as air bags
• It may obstruct visibility
Front Panel and Buttons
Button & Feature Layout
RST Use a pin to insert into reset port to trigger unit reset. (Hold for 20 secs. to reset)
Hold to power up.
Home
Return
Volume up
Volume down
Turning Power On
1. Turn on the engine key to the “ACC” or “ON” position
2. Press and hold the power button for 3 seconds
• When the engine key is turned to o position, the unit Status Bar is turned o
(on the top of radio screen and app screen) you can swipe down for more.
www.PyleUSA.com
2
To Next Page
Loading...
Need help?
General
