C
Cory RossJul 27, 2025
Why is the status LED light on orange on my Pylontech Storage?
- MMichael DaviesJul 27, 2025
If the status LED on your Pylontech Storage system is orange, it indicates an error with the controller module. Try restarting or replacing the controller. It could also mean a cell, module, or controller is under protection. In this case, check the battery LED and debug. Press the start button for 10 seconds; if there's power output, charge the system. If not, use a debug tool for further checking. If these steps don't resolve the issue, replace the controller.