Pylontech Force-L2 User Manual

19 / 31
3.5 Cables connection
 Connect the power Terminal +/- to the inverter or the DC switches.
Danger: All the plugs and sockets of the power cables must be not reverse connection.
Danger: Do not short circuit or reserved connection of the battery system’s positive and negative
port.
Caution: Wrong communication cables connection will cause the battery system failure.

Pylontech Force-L2 Specifications

General

Battery Type	Lithium Iron Phosphate (LiFePO4)
Nominal Voltage	51.2 V
Capacity per Module	3.55 kWh
Usable Energy	3.2 kWh
Operating Temperature	-10°C to 50°C
Communication Interface	CAN, RS485
Warranty	10 years
Peak Discharge Current (3 sec)	100 A
Protection Degree	IP20
Cycle Life	6000 cycles at 80% DoD