M-Controller II System Operation Manual - 29 -
84350-201-001 Rev C
8 Computer Interface: Programming and Auditing
NOTE: WHEN PROGRAMMING THE M-CONTROLLER WITH A LAPTOP ENSURE
THAT THE LAPTOP IS NOT CONNECTED TO ANY POWER SOURCE. FAILURE TO
FOLLOW THESE INSTRUCTIONS COULD RESULT WITH DAMAGES TO THE
CONTROLLER AND OTHER DEVICES CONNECTED TO IT.
The M-Controller can be fully configured and programmed from the keypad; however,
for even moderately complex networks this task becomes tedious. Therefore, we have
supplied an interface and computer program (M-View) to allow all database
programming to be setup on a computer (laptop) and downloaded to the M-Controller.
USB A male to USB B male cable is included in the M-Controller shipping package.
NOTE:
WHEN PROGRAMMING THE M-CONTROLLER WITH A LAPTOP THROUGH USB
PORT ENSURE THAT THE LAPTOP IS NOT CONNECTED TO ANY POWER
SOURCE. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT WITH
DAMAGES TO THE CONTROLLER AND OTHER DEVICES CONNECTED TO IT.
To Next Page
Loading...