4 – Managing Switches
Switch Data Window
4-6 59235-02 A
L
SSH Enabled Secure Shell status. If enabled, an encrypted data path is
provided for command line interface sessions.
SSL Enabled Secure Sockets Layer status. If enabled, encryption for
switch management web applet and CIM sessions is pro-
vided.
CIM Enabled Common Information Model status. The CIM agent is
based on the SNIA Storage Management Initiative Speci-
fication (SMI-S), which is the standard for SAN manage-
ment in a heterogeneous environment.
FTP Enabled FTP status
Management Server
Enabled
Management server status.
SNMP Enabled SNMP enabled or disabled.
Call Home Enabled Call Home status. If enabled and configured, switches can
send alerts and events to pagers, Email and QLogic Tech-
nical support. Users can configure the type of events and
where the alerts are sent.
Zones/Security Group
Merge Auto Save If enabled, any zoning updates from the fabric will be
saved in permanent (non-volatile) memory as well as tem-
porary memory. If disabled, any zoning updates from the
fabric will be saved only in temporary memory and will be
lost after a switch reset.
Zoning Default Visibility Zoning visibility status. Permits (All) or prevents (None)
communication with other switches in the absence of an
active zone set.
Default Zone Disables communication between ports and devices not
defined in the active zone set, or when there is no active
zone set.
Discard Inactive Automatically removes the previously active zone set
when a zone set is activated on a switch.
Implicit Hard Zoning Introduces hardware enforcement of zoning regardless of
type. All zones and all supported zone member types will
have hardware enforcement.
Security Auto Save N/A - does not apply to this switch
Table 4-1. Switch Data Window Entries (Continued)
Entry Description
To Next Page
Loading...
Need help?
General
