QNAP ES1686dc Series User Manual

Storage Controller Power Button
Operation User Action Result
Power on Press the button once. The storage controller powers on.
Power off Press and hold the button for 5
seconds.
The storage controller powers off.
Force power off Press and hold the button for 10
seconds.
The storage controller shuts down.
Important
Use this method only
when the storage
controller is
unresponsive.
Reset Button
Operation User Action Result
Basic system reset Press and hold the
button for 3 seconds.
The following settings are reset to default:
• System administrator password: admin
• TCP/IP configuration:
• Obtain IP address settings automatically via
DHCP
• Disable jumbo frames
• If port trunking is enabled (multi-LAN models
only), the port trunking mode is reset to “Active
Backup (Failover)”.
• System port: 8080 (system service port)
• Security level: Low (Allow all connections)
• LCD panel password: (blank)
• VLAN: Disabled
• Service binding: All NAS services can run on all
available network interfaces.
Advanced system
reset
Press and hold the
button for 10 seconds.
The default factory settings are restored.
To retrieve old data after an advanced system reset,
recreate the previous folder structure on the NAS.
ES1686dc User Guide
Product Overview 16

QNAP ES1686dc Series Specifications

General

Brand	QNAP
Model	ES1686dc Series
Category	Storage
Language	English