Single-path configuration
10. Connect the power cables to the new expansion unit.
11. Power on the new expansion unit.
12. Log on to QES as administrator.
13. Go to Main Menu > Storage Manager > Storage > Disks .
14. Click Recover, and then select Reinitialize enclosure ID.
QES scans for and detects the new expansion unit and installed disks.
15. Bring all offline storage pools back online.
QES Installation
The ES1686dc uses the QNAP QES operating system. You can install QES using the following method.
Installing QES Using Qfinder Pro
Warning
Installing QES deletes all data on the drives. Back up your data before proceeding.
1. Power on the NAS.
2. Connect the NAS to your local area network.
ES1686dc User Guide
Installation and Configuration 43
To Next Page
Loading...
Need help?
General
