Setting up the NAS
1. Place your NAS device in an environment that meets the requirements.
For details, see Installation Requirements.
2. Install the drives.
For details, see the following topics:
• Installing 3.5-inch Hard Drives on 3.5-inch Trays
• Installing 2.5-inch Hard Drives or Solid State Drives on 3.5-inch Trays
• Installing M.2 Solid State Drives on the System Board
• Installing Expansion Cards
3. Connect the power cord and all applicable cables.
4. Power on the NAS.
5. Install QES.
For details, see QES Installation.
6. Log on to QES.
ES1686dc User Guide
Product Overview 19
To Next Page
Loading...
Need help?
General
