QNAP QSW-M3212R-8S4T - Page 33

• Do not power o your device during the rmware update process.
Important
• Make sure you review Firmware requirements before updating the rmware.
• The update may require several minutes or longer, depending on your hardware
conguration and network connection.
1. Log in to QSS.
2. Go to System > Firmware Update > Live Update .
3. Click Check for update.
QSS checks for available rmware updates. You can choose to update QSS if there is an available
update.
4. Click Update System.
A conrmation message appears.
5. Click Update.
QSS updates the rmware.
Updating the rmware manually
Warning
• To prevent data loss, QNAP recommends backing up all data on your device before
updating the rmware. For details, see Backing up system settings.
• Do not power o your device during the rmware update process.
Important
• Make sure you review Firmware requirements before updating the rmware.
• The update may require several minutes or longer, depending on your hardware
conguration and network connection.
1. Download the device rmware.
a. Go to http://www.qnap.com/download.
b. Select the product type.
c. Select your device model.
d. Read the release notes and conrm the following:
• The device model matches the rmware version.
• Updating the rmware is necessary.
• Check for any additional rmware update setup instructions.
2. Ensure that the product model and rmware are correct.
3. Select the download server based on your location.
QSW Managed Switches User Guide
QSS 32