EasyManuals Logo

QNAP TL-D400S User Manual

QNAP TL-D400S
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
2. Product Overview
This chapter provides basic information about the QNAP TL-D400S, TL-D800S, and TL-D1600S JBOD
enclosures.
About QNAP JBOD Enclosures
QNAP JBOD enclosures increase the capacity and utility of your NAS or computer and provide a wide range
of storage applications. Drives installed in JBOD enclosures can be managed independently or be
configured as software RAID by the host device. The TL-D400S, TL-D800S, and TL-D1600S feature
SFF-8088 ports to ensure quick and efficient data transfer between the JBOD enclosure and the host device.
Hardware Specifications
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Expansion Enclosures
Component TL-D400S TL-D800S TL-D1600S
Ordering Information
Ordering P/N TL-D400S TL-D800S TL-D1600S
Storage
Drive bays 4 x 3.5-inch SATA 6 Gbps 8 x 3.5-inch SATA 6 Gbps 12 x 3.5-inch SATA 6
Gbps bays
4 x 2.5-inch SATA 6
Gbps bays
Drive compatibility 3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid-state drives
3.5-inch bays:
3.5-inch SATA
hard disk drives
2.5-inch SATA
hard disk drives
2.5-inch SATA
solid-state drives
2.5-inch bays:
2.5-inch SATA
solid-state drives
Drive tray type Key lock
Hot-swapping Supported
External I/O Ports & Expansion Slots
QNAP JBOD Enclosure User Guide
Product Overview 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TL-D400S and is the answer not in the manual?

QNAP TL-D400S Specifications

General IconGeneral
Hot-swapYes
Storage drive size2.5/3.5 \
Total installed storage capacity0 TB
Number of storage drives supported4
Supported storage drive interfacesSerial ATA II, Serial ATA III
USB connectivityNo
Fan diameter120 mm
Product typeHDD/SSD enclosure
Product colorBlack, Grey
LED indicatorsFan fail, HDD, Link
Number of fans1 fan(s)
Noise level20.1 dB
Data transfer rate6 Gbit/s
Power source typeAC
AC adapter frequency50/60 Hz
AC adapter input voltage100 - 240 V
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Cables includedAC, MiniSAS
Harmonized System (HS) code84733080
Weight and Dimensions IconWeight and Dimensions
Depth219 mm
Width160.2 mm
Height168.5 mm
Weight3660 g

Related product manuals