11. Connect all cables and external attachments.
12. Connect the power cord to the electrical outlet.
13. Power on the NAS.
Installing Expansion Cards on the TS-832PXU, TS-832PXU-RP or the TS-1232PXU-RP
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
Note
This process applies only to the TS-832PXU, TS-832PXU-RP, and TS-1232PXU-RP.
For details on the TS-432PXU and the TS-432PXU-RP, see Installing Expansion Cards on
the TS-432PXU or the TS-432PXU-RP.
1. Check the expansion cards and brackets supported by your model on the QNAP website.
TS-x32PXU User Guide
Installation and Configuration 23
To Next Page
Loading...
Need help?
General
