Audio Alert
Duration Frequency Description
Short beep (0.5 seconds) 1 • The NAS is starting up.
• The NAS is resetting
configurations (reset button).
• The NAS is resetting
configurations and rebooting
(reset button).
• The operating system was
updated.
• The device is waking up from
sleep mode.
• The USB device has been
removed (USB One-Touch
copy button).
• The device is starting USB
One-Touch copy.
3 • Cannot detect installed disk.
The user tried to copy the NAS
data to the external storage device
from the front USB port, but the
data cannot be copied.
TS-x32PXU User Guide
Basic Operations 49
To Next Page
Loading...
Need help?
General
